422SB- Seated Lounger Swing Restoration Kit

Maintaining your outdoor swing is essential for longevity and comfort. If you’re looking to replace the seat fabric on your 422SB model swing, follow these simple step-by-step instructions to ensure a smooth and efficient process.

Step-by-Step Instructions:

1. Remove Top Head Bracket:
   • Use a 10mm tool to remove the 4 screws per seat.
   • Required Parts: Part #87 (M6*1″ Button Head Bolt) and Part #54 (T-Nut).
   • 
2. Remove Inset Screw:
   • Take out the inset screw in the middle of the wooden arms with a 4mm hex tool.
   • Required Part: Part #72 (M6*3/8″ Socket Cap Screw).
   • 
3. Remove Wooden Arms:
   • Use a 13mm tool to take off the screws holding the wooden arms to the seat frame.
   • Required Part: Part #67 (M8*3/4″ Button Head Bolt).
4. Remove Footrest:
   • Remove the footrest using a 10mm tool to access the bolts under the seat.
   • Required Part: Part #66 (M10*3 3/8″ Button Head Bolt).
   • 
      
     
5. Remove Bolts Under the Seat:
   • Use a 17mm tool to remove the 4 bolts under the seat.
   • Required Parts: Part #53 (M10*2 1/4″ Carriage Bolt), Part #82 (M10 Lock Nut), and Part #89 (M10 Fender Washer).
   • 
6. Remove Old Fabric and Install New Fabric:
   • Slide the old fabric off the frame and insert the fabric seat rods (Part #34) into the new fabric.
   • Slide the new fabric onto the seat frames (Part #11R Left Seat Bottom Tube and Part #11L Right Seat Bottom Tube).
7. Reassemble:
   • Reverse the steps to reassemble the swing, ensuring all bolts and screws are securely tightened.

By following these instructions and using the specified parts, you can easily replace the seat fabric on your 422SB model swing. This maintenance will help keep your swing looking great and functioning well for years to come.

For further assistance or to order parts, use our contact page.